General Manuals for most Power bank

Mobile power conversion rate is calculated:
To a certain brand of 10,400 mA mobile power, for example, according to the law of conservation of energy, mobile power batteries is 3.7V, while the mobile phone charging voltage is 5V, so the first step, through the boost converter is calculated after 3.7X10400 / 5 = 7696mAh (ie state at 5V, 10,400 mA mobile power output of 7696 mA), this process will be the circuit board of the power loss of about 15%, the remaining 85% of the capacity of this coefficient is called "Moving the power conversion rates." Calculated at 85%, 7696X0.85 = 6541mAh.
Such as your phone is 1800 mA, then you can charge 6541/1800 = 3.6;
Apple phone's battery is 1440 mA, then we can charge 6541/1440 = 4.5 times.
So some people say that the error 10000 mobile power, my phone is 2000 mA, can charge five times, there is no scientific basis.
During this period there will be a small amount of other losses, such as loss of power lines produce timber, so be sure you are suggested to use the phone comes with original wire, to the greatest degree of reduction of the middle of the transmission loss

There are many brands of Power Bank ( Portable Battery ) in the market. A lot
of brands manupulate the capacity by more than 100%. Below are the battery
performance that we tested charging the smarthpones and tablets.

Samsung 18650 Battery cell Yield: about 70-75% of its capacity .

China made 18650 Battery Yield : 45-60%

China made Polymer battery : 50%-60%.

Above informations are the guidance when you buy the powerbank. If you buy
6000 mAh Power bank that made of Samsung battery , you should get the 70% yield
, which is about 4200mah. The number of charges you can charge your device
depends on the capacity of the device.Let us say .If you charge your iphone
5(1,420mAh) with the 6000 mAh Power Bank, you should get about 3 full charge.
providing you turns off the device while your device is being charged.However .
if you device is turned on along with the 3G and WIfi enabled , the total
performance capacity will be reduced by 25%.

Warning: Do not use 1A output to charge Ipad or tablets , this
will result damaging or short circuit your charger.

Charger 1A output For Iphone ,
Smartphones,Ipod charging

Chargering stages of Smartphones ,Iphone and Ipod

Standard Charging

Most lithium-ion batteries use a fast charge to charge your device to 60% battery capacity, then switch to trickle charging. That?? about one to two hours of charge time to power an smart phones and ipod to 60% capacity, then another
one to two hours to fully charge it, if you are not using the device while charging. You can charge all lithium-ion batteries a large but finite number of times, as defined by charge cycle.

Charge Cycle. Using and recharging 100% of battery capacity equals one full charge cycle.

Proper maintenance of a lithium-based battery:
It??
important to keep the electrons in it moving occasionally. Be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).

Charger 2A OUTPUT FOR IPAD , AND TABLETS

IPAD  and  tablets has about 6 times capacity of all smartphones and it requires 5 to 8X longer to charge. The capacity of Ipad  is 4000mAh - 11,000 mAh and it requires a 2A charging output.

To charge your iPad battery with power bank Connect to a high-power USB 2.0 port using the included cable.

Note: Some USB 2.0 ports and accessories do not provide enough power to charge iPad. When this occurs the message "Not Charging" appears in the status bar next to the battery icon.

Warning about fast charge on Lithium battery of the smartphones

Do not ultra-fast charge batteries if possible and charge at a more moderate rate of 1C or less.( !C= charge or discharge of a battery rated at 1Ah is 1A (A maker of the 18650 Li-ion recommends 0.7 C)

Figure 1 compares the cycle life of a lithium-ion battery when charged and discharged at 1C, 2C and 3C. A 1C charge and discharge cycle causes the capacity drop from 650mAh to 550mAh after 500 cycles, reflecting a decrease to 84 percent. A 2C accelerates capacity fade to 310mAh, representing a decrease to 47 percent, and with 3C the battery fails after only 360 cycles with 26 percent remaining capacity.

Although the battery performs best at a gentle rate of 1C and less, we must  keep in mind that some applications require high charge and discharge rates, and  the user must take shorter life expectation into account. If full cycles with rapid charge and discharge are the norm, consider using a larger battery. This will not only provide more reserve capacity but it will also lower the C-rate in that a given charge and discharge current is less intrusive on the larger pack. An analogy can be made with an underpowered engine pulling a large vehicle; the stress is too large and the engine will not last.

• Come soon! 1 . Water angel
• Come soon! 2 . THE MARINE
• Come soon! 3 . WLESS-S5
• Come soon! 4 . CHARZON TUBE
• Come soon! 5 . SONIC WAVE1
• Come soon! 6 . Joules 5000 Solar Charger
• Come soon! 7 . Road Warrior Power Bank
• 8 . TALKPLUS-i5 POWER CASE
• 9 . COLUMBUS POWER BANK
• 10 . CHARZON CHACHA
• 11 . KRAKEN 12,000 POWER BANK
• 12 . CHARZON AMADEUS BOOMBOX
• 13 . Charzon The Fast PowerBank
• 14 . Lipstick 2800 Sparkling